Features Include:
Hot Dipped Galvanised Grid
Modular System - Simply bolts together at site
Easy to Relocate - 1 hour installation on a level site with 15Amp power (single phase) and water access
15 Amp power (single phase)
| Our Shaker Grid is a specially designed for positioning at the entry or exit of any site |
| The design of the Shaker Grid is unique in it's transverse action on the vehicles suspension system |
| Features Include: Hot Dipped Galvanised Grid Modular System - Simply bolts together at site Easy to Relocate - 1 hour installation on a level site with 15Amp power (single phase) and water access 15 Amp power (single phase) |
|
|
|
||
| To watch the | ||
| Shaker Grid Dvd | ||
| just click on the disk | ||
| Optional Extras Include: | Overhead Sprayer |
| Increased water pressure | |
| Hot dipped galvanised WM50110 mesh over the top of each side, the full length of shaker unit, for the safety of personnel walking on the unit when using the manual wash system. | |
| The inclusion of two spray bars up to approximately the window level of standard vehicles. These will spray inwards and down for washing the sides of vehicles |
| Weed Shaker: | Wings are higher on this grid to ensure more water is contained within the unit as this unit has a greater pressure and is more of a permanent fixture. Also the side or end outlets are larger to allow the reservoir to drain more efficiently to your holding tanks. |
| Design Specifications: | The Shaker Unit is a fully engineered unit designed to the following: |
AS 4100:1998 Steel Structures Code |
|
| AUSTROADS Bridge Code – W7 Wheel Loads - Class 5 Roads | |
| AUSTROADS Bridge Code – T44 Wheel Loads - Class 5 Roads | |
| The design verification certificate number is DVC1414. | |
| All steel components are hot dipped galvanized | |
| The wings are constructed from Colourbond Spandek | |
Reservoir: |
The reservoir is poly welded with a capacity over 4 tanks – 1800 Lt. |
| Weed Shaker: | The reservoir is poly welded with a capacity over 2 tanks – 3300 Lt. |
| Pump: | AC 2.4kw 240 V |
| 90NB Inlet and Outlet | |
| Modified with a ‘Z’ cast iron inlet strainer | |
| Discharge line strainer/filter | |
| 250 Litres per minute @ 3 bar pressure (600 litres per minute @ 5 bar pressure) | |
| Electrical System: | The electrical system is boxed in a stainless steel mining grade IP66 enclosure and all electrical components are Clipsal 56 series with the following specifications: |
| Voltage sensor relay | |
| Current sensor | |
| Bypass timer | |
| Ct TAIBB 4 5ct | |
| Wheel pivot switch relay, 24v | |
| 240 24v Transformer | |
| No water flow turn off | |
| Run timer relay by-pass for manual hosing of problem vehicles | |
| Low voltage fault light and relay | |
| Earth leakage compliance | |
| Fluid Recycling: | The Shaker Grid has moulded neoprene reservoirs which recycle the water being used. |
| These reservoirs can be used to add further chemicals such as: | |
| Degreasers to break down oils | |
| Pesticides to control weeds | |
| Installation Notes: | The shaker Grid is fully portable and only requires the site to have access to 15 AMP power and a water supply |
| How to purchase Gridrite Grids: | To order always try your local rural merchandise store first. |
| We have an extensive list of dealers and you can see if your store is listed by clicking here | |
| If your local store is not on the list, ask them to contact us | |
Whichever way you choose to order, expect prompt service! |